Other Products Available with Jayanti Elastomers are as follows:

ACRYL NITRILE BUTADIENE RUBBER (NBR) :

NBR has good mechanical properties when compared with other elastomers and particularly high wear resistance.

COMPATIBLE WITH : Aliphatic hydrocarbons (propane, butane, petroleum oil, mineral oil and grease, diesel, fuel oils); Vegetable and mineral oil & grease; HFA, HFB and HFC - Fluids; Many diluted acids, alkali, salt solution at low temperatures; Water (special compounds upto + 100^oC.

NOT COMPATIBLE WITH: Fuels with high aromatic content (for super fuels a special compound must be used); Acromatic hydrocarbons (Benzol); Chlorinate (Trichloethlene); Polar solvents (Katone, Aceone, Acetic acid, - Ethyelene, Ester); Strong acids; Brake fluid glycol base; Ozone, weather and aging resistant.

ETHYLENE PROPYLENE DION RUBBER (EPDM) :

EPDM is a rubber manufactured as a Copolymer of Ethylene and Propylene. COMPATIBLE WITH : Hot water and steam upto +150^oC, special compounds upto + 200^oC; Brake fluids on Glycol base upto + 150^oC; Many organic and inorganic acids; Cleaning agent, Natron-and kali-alkalies; Hydraulic fluids based on phosphate-Ester (HFD-R); Silicone oil and grease; Many polar solvents (Alcohols, Ketones, Ester); Skydrol 500 and 7000; Ozone, aging and weather resistant. NOT COMPATIBLE WITH : Mineral oil products (oils, grease and fuels).

3. BUTYL RUBBER (IIR) :

Butyl has a low gas permeability rate and good electrical properties.

COMPATIBLE WITH : Hot water and steam upto +130^oC; Brake fluids on Glycobase; Many acids; Salt solution; Polar solvents e.g. alcohol, Ketones and Esters; Hydraulic fluid based on poly-Glycol (HFC-fluids); and phosphate-Ester (HFD-R-Fluids); Silicone oil and grease; Skydrol 500 and 7000; Ozone, aging and weather resistant.

NOT COMPATIBLE WITH : Mineral oil and grease; Fuels; Chlorinated hydrocarbons.

4.CHLOROPRENE RUBBER (CR) (NEOPRENE) :
Chloroprene was the first synthetic rubber and shows in general good ozone, aging and chemical resistance, acceptable oil resistance and good mechanical properties over a wide temperature range.

COMPATIBLE WITH : Mineral oil paraffin base with low DVI e.g. ASTM - OIL 1, ; SILICONE OIL and grease,; Water and water solvents at low temperatures; Refrigerants (ammonia, carbon-dioxide, freon); Improved ozone, weather and aging resistance compared with NBR.

NOT COMPATIBLE WITH: Aromatic Hydrocarbons (Benzene); Chlorinated hydrocarbons (Thrichloroethylene); Polar solvents (Ketone, Ester, Ether, Acetone).